|
SAMRAT 16
Crimping pliers is fitted with jaws so designed to have close
metal contact between wires and non-insulated cable terminal
ends with capacity from 0.5 mm sq. to 16 mm sq. |
|
VIKRANT 50
Manually operated crimping tool with a rotating die of
varying sizes from 6 mm sq. (for Aluminium Cable Terminal
Ends & In-Line connectors only) This handy and inexpensive
tool is suitable for non-insulated cable terminal ends and
connectors. This tool is available with crimping hexagonal
profile. |
|
VIRAT 6
Crimping Plier is fitted with jaws so designed to have close
metal to metal contact between wires and non insulated cable
terminal ends of capacity from 1.5 mm sq. to 6 mm sq. |
|
SANGRAM 400
Mechanical gear powered hand operated crimping tool with
interchangeable Hex type 9 set of dies for capacity 50 mmsq.
to 400 mmsq. It is a multi stroke tool with ratchet, pin
lock, rapid motion and has a maximum opening of 90 degree
This light weight tool weighs approx 4.8 kgs. and is very
handy to carry at any remote place for usage. The overall
length of the tool is 700 mm and it develops a maximum
pressure upto 100 km. |
|
VISHAL 185
Mechanical Handy Plier Type Tool with interchangeable die
sets for compression and sleeves 10 mm sq. to 185 mm sq. It
is a single operation tool and is most suitable for
crimping at remote places and in trenches too (i.e. for
underground cables) This handy tool weights approx. 4.7 kgs.
and is very convenient to carry. The epoxy powder coating on
the tool protects the same from seasonal effects like rust
etc. |
|
SURYA 400
Mechanical Handy Plier Type Tool to crimp aluminium tubular
terminal ends and connectors upto 240 mm sq. This tool is
provided with interchangeable hex pattern 11 set of dies and
is most convenient for crimping at remote places and in
trenches too (i.e. for underground cables) It is supplied
with extension handles to increase the leverage, in turn
reducing the manual efforts. The epoxy powder coating on the
tool protects the same from seasonal effects like rust etc. |
|
TRISHUL
Ratchet hand tool is a professional three in one tool that
crimps the three standard pre-insulated terminals Red, Blue
& Yellow sizes i.e. 1.5 mm sq., 2.5 mm sq. and 4.6 mmsq.
This tool features a adjustment dial with six sections to
further enhance the quality of the tool This tool is
designed as push to release and close to release |
|
GRD 95
Bench type hand operated crimping tool with 9 set of dies
(R-1 to R-10 except R-8) is designed to crimp copper cable
terminal ends from 10 mm sq. to 95 mm sq. This tool is
having detachable handles with an overall length of 56 cm
and weights approx 4.5 kg This tool is guaranteed for one
year from the date of supply for any manufacturing defect |
|
HPCT 20
Hand operated hydraulic crimping tool with set ring dies is
designed to crimp Copper / Aluminium Cable terminal ends
upto 400 mm sq. The crimping tool with set of ring dies is
designed to crimp copper / aluminium cable terminal ends
upto 400 mm sq. The crimping jack and hydraulic pump are
connected with a 2 meter length hose pipe and the hydraulic
pump are connected with a 2 meter length hose pipe and the
hydraulic pump are connected with a 2 meter length hose pipe
and the hydraulic pump is having a capacity to develop
pressure upto 250 kg./ cm sq. The crimping jack is made from
solid special alloy steel to withstand the pressure
developed while crimping and safety |
|
AAKAASH 400,
AAKASH 500
Dieless flip-top hand operated hydraulic crimping tools are
suitable for cable terminal ends, In-Line connectors,
Ferrules & for tension / non tension jointing to AAC & ACSR
Conductors from 6 mm sq. to 400 mm sq. respectively |